澳门新葡萄京官网注册批量删除存储过程和批量修改存储过程

核心提示:因为一些网站是使用虚拟主机.用sql-server导数据上去的话

–更改某个表
exec sp_changeobjectowner ‘tablename’,’dbo’
–存储更改全部表
CREATE PROCEDURE dbo.User_ChangeObjectOwnerBatch
@OldOwner as NVARCHAR(128),
@NewOwner as NVARCHAR(128)
AS
DECLARE @Name as NVARCHAR(128)
DECLARE @Owner as NVARCHAR(128)
DECLARE @OwnerName as NVARCHAR(128)
DECLARE curObject CURSOR FOR
select ‘Name’ = name,
‘Owner’ = user_name(uid)
from sysobjects
where user_name(uid)=@OldOwner
order by name
OPEN curObject
FETCH NEXT FROM curObject INTO @Name, @Owner
WHILE(@@FETCH_STATUS=0)
BEGIN
if @Owner=@OldOwner
begin
set @OwnerName = @OldOwner ‘.’ rtrim(@Name)
exec sp_changeobjectowner @OwnerName, @NewOwner
end
— select @name,@NewOwner,@OldOwner
FETCH NEXT FROM curObject INTO @Name, @Owner
END
close curObject
deallocate curObject
GO

批量删除存储过程和批量修改存储过程 修改:

因为一些网站是使用虚拟主机.用sql-server导数据上去的话.
数据库的用户默认是你登录的用户,不是dbo,有时就和本地产生不一致.

declare proccur cursor for select [name] from sysobjects where name
like ‘Foods_%’declare @procname varchar(100)declare @temp
varchar(100)open proccurfetch next from proccur into
@procnamewhile(@@FETCH_STATUS = 0)begin set @temp=’kcb_’+@procname
EXEC SP_RENAME @procname,@temp print(@procname + ‘已被删除’) fetch
next from proccur into @procnameendclose proccurdeallocate proccur

–功能说明:成批更改数据库所有者的对象 –作者:不详 –用法:exec
ChangeObjectOwner nmkspro,dbo –即可将所有nmkspro所有者的对象改为dbo所有
–运行成功后将提示:注意: 更改对象名的任一部分都可能破坏脚本和存储过程。
CREATE PROCEDURE dbo.ChangeObjectOwner @OldOwner as
NVARCHAR(128),–参数原所有者 @NewOwner as NVARCHAR(128)–参数新所有者 AS

详细实例

DECLARE @Name as NVARCHAR(128) DECLARE @Owner as NVARCHAR(128) DECLARE
@OwnerName as NVARCHAR(128)

批量修改表的所有者:

DECLARE curObject CURSOR FOR select Name = name, Owner = user_name(uid)
from sysobjects where user_name(uid)=@OldOwner order by name

EXEC sp_MSforeachtable ‘exec sp_changeobjectowner ”?”,”dbo” ‘
单个修改表所有者: exec sp_changeobjectowner ‘要改的表名’,’dbo’

OPEN curObject FETCH NEXT FROM curObject INTO @Name, @Owner
WHILE(@@FETCH_STATUS=0) BEGIN if @Owner=@OldOwner begin set @OwnerName
= @OldOwner + . + rtrim(@Name) exec sp_changeobjectowner @OwnerName,
@NewOwner end

批量修改存储过程的存储过程:

FETCH NEXT FROM curObject INTO @Name, @Owner END

CREATE PROCEDURE ChangeProcOwner @OldOwner as
NVARCHAR(128),–参数原所有者 @NewOwner as NVARCHAR(128)–参数新所有者
AS DECLARE @Name as NVARCHAR(128) DECLARE @Owner as NVARCHAR(128)
DECLARE @OwnerName as NVARCHAR(128) DECLARE curObject CURSOR FOR
select ‘Name’ = name, ‘Owner’ = user_name(uid) from sysobjects where
user_name(uid)=@OldOwner and xtype=’p’ order by name OPEN curObject
FETCH NEXT FROM curObject INTO @Name, @Owner WHILE(@@FETCH_STATUS=0)
BEGIN if @Owner=@OldOwner begin set @OwnerName = @OldOwner + ‘.’ +
rtrim(@Name) exec sp_changeobjectowner @OwnerName, @NewOwner end
FETCH NEXT FROM curObject INTO @Name, @Owner END close curObject
deallocate curObject GO 执行 exec ChangeProcOwner ‘xx’,’dbo’ 或者exec
ChangeProcOwner ‘?’,’dbo’

close curObject deallocate curObject GO

还有一种方法:

批量修改: EXEC sp_MSforeachtable exec sp_changeobjectowner ?,dbo
单个修改: exec sp_changeobjectowner 要改的表名,dbo

–如果一个数据库教程中(表和存储过程)有多个用户名,而要把它所有都改成dbo
就可以用如下的语句

方法一:直接点击该表-》设计-》属性-》更改上面的所有者。该方法针对于表少的情况下。
方法二:利用脚本直接执行,用系统帐号或者超户登陆到该数据库,然后执行下面语句:
sp_configure allow updates,1 go reconfigure with override go update
sysobjects set uid=1 where uid1
–根据条件可以任意修改,在多用户之间切换。 go sp_configure allow
updates,0 go reconfigure with override

Select ‘sp_changeobjectowner ”’ + User_Name(Uid) + ‘.’ + name +
”’,”dbo” ‘ From sysobjects Where Uid Not in (User_ID(‘dbo’)) And
Type In (‘U’,’P’)

删除:

先看单删除的

sqlserver
2005一次只能删除一个存储过程,如果多了,需要很长时间才能删完,所以写了一段语句,直接就把当然数据库下所有用户自定义的存储过程给drop了。不过使用都请留心,当前打开的数据库哦。下面贴代码

declare proccur cursor for select [name] from sysobjects where
type=’P’declare @procname varchar(100)open proccurfetch next from
proccur into @procnamewhile(@@FETCH_STATUS = 0)begin –exec(‘drop
proc ‘ + @procname) –本句被注释,使用时请取消

print(@procname + ‘已被删除’) fetch next from proccur into
@procnameendclose proccurdeallocate proccur

再看批量删除存储过程

declare proccur cursor for select [name] from sysobjects where name
like ‘Users_%’ declare @procname varchar(100)open proccurfetch next
from proccur into @procnamewhile(@@FETCH_STATUS = 0)begin exec(‘drop
proc ‘ + @procname) print(@procname + ‘已被删除’) fetch next from
proccur into @procnameendclose proccurdeallocate proccur

发表评论

电子邮件地址不会被公开。 必填项已用*标注